In the UK we have the privilege of being able to take our own passport photographs. Most of us will pop down to the local automated machine and have passport photo size prints inside ten minutes – but at the cost of at least £5 per set, photographing the whole family for a batch of passport renewals in time for that holiday can quickly add up.
It’s a cost, though, that can be quickly and simply avoided by setting up a shoot at home, working some Photoshop magic to your images, and printing on some decent quality photo paper at the correct passport photo dimensions. Our money-saving guide shows you how to shoot your own passport sized photos quickly and easily at home…
Make Your Own Passport Photos – Official Guidelines
Shooting passport photographs demands that you stick to some stringent rules. A neutral expression with closed mouth, no red-eye, clear and sharp focus, with a plain cream/grey background, posed face-on to the camera, are all a must. The photo should also have been taken in the last month – so you won’t be able to use an old photo that you happen to have on your computer.
There should be no shadows on the face, no hair in the face, no facial-coverings and, after printing on photo paper, the images must have no tears, creases or marks. Though official rules state you cannot wear anything that covers your head, there is an exemption if the covering is worn for religious or medical reasons.
The official rules state ‘no glare off glasses’, though if you wear glasses you’re probably best off just removing them entirely – you also can’t wear tinted glasses or sunglasses.
If you’re taking a passport photo of a young child they have to be the only person in the photo – you can’t prop them up in your lap. Official advice suggests that very young infants are placed on a grey sheet and photographed from above. The posing restrictions for children under 6, however, are a little less stringent – the child doesn’t have to be looking at the camera or maintaining a neutral expression. Children under 1 also don’t have to have their eyes open, though if someone is supporting their head with a hand, that hand is not allowed to be visible.
It’s worth checking the guidelines as they can change frequently (www.gov.uk/photos-for-passports).
Make Your Own Passport Photos – Shooting
Find a light-coloured wall (should be light grey or cream, not 100% white where possible) as a background and shoot your passport photo subject using the portrait orientation.
Avoid using the flash as this increases the likelihood of red-eye and background shadows (however, if you can turn the flash down then a small pop of fill-in can provide good colour balance and open up facial detail).
Daylight is best, such as from a window, as this can provide as equal a balance as possible to avoid shadows on the face and background. Flat lighting is integral, as shadows over the face may cause your images to be rejected. Expose for the subject’s face, preferably using a spot or centre-weighted evaluative metering setting if your camera offers this.
Take several photos as to get the best possible image, avoiding smiling and blinking. You could even do this yourself if you use the camera’s self-timer and rest on an appropriate surface or, if you have one, use a tripod.
You can’t use a photo that has been cut down from a larger photo, so make sure to position yourself or the subject so that they are completely filling the frame. The image of you, from the crown of your head to your chin must be between 29 and 34mm (while the overall height of the image is 44mm).
When reviewing your images, ensure that they are well exposed – you don’t want underexposure, as the detail of the face will be lost in the shadows.
Your surroundings are important and need to be neutral – for example, should you stand by something red it will have a luminescence that will reflect red light back onto you. So snaps from down the local boozer won’t do – you have to specifically shoot for the right posed shot in the correct location. As much as a photobooth will happily do all this for you, avoiding the expense is the target here.
Make Your Own Passport Photos – Post-production
Avoiding post-production as much as possible is the aim of the game – in fact, images which have been digitally manipulated to change your appearance are not allowed.
However, as the background of your passport photo image is likely a little dark and off-colour, it’s easy to use PhotoShop or Elements to make the subject stand out. Use the Magic Wand or Quick Select tool to select your background and simply press the delete key to remove it – ensuring the fill layer is a 5-10% grey as a totally white background is against the guidelines and will cause rejection.
You may be left with some tricky areas around the hair but these can be ‘picked off’ by zooming in and gently deleting (use the Eraser tool) offending areas, or changing the tolerance of your selection tools and re-selecting specific areas.
Don’t worry about being too precise, as the image you are working on now is of a much larger size than the final print will be, so there is a lot of give in how much detail will be picked up in the final print. Once you’re happy select Layer > Flatten Layer.
Make sure you have enough brightness to give the impression of being shot under bright light, like a flash. But don’t wash out details or blow highlights though.
You can bring up the Levels palette by going to Image > Adjustments > Levels. Now bring the left and right markers under the histogram towards the centre to increase contrast, and move the centre marker for brightness.
Make Your Own Passport Photos – Readying for print, photo size and dimensions
What size is a passport photo? Passport guidelines on passport photo size state that a passport photo should be 35mm wide and 45mm tall. Make a new file in PhotoShop (File > New) at this exact size, at 300dpi.
Select your already edited image from the other window and, using the Move tool, click and drag into your new window.
If it’s too large use the Free Transform tool (Edit > Free Transform) whilst holding down the Shift key when dragging to resize to ensure correct proportion. You may need to zoom out to find the edges if it’s really big. The passport photo dimensions should now be correct.
Once you have your passport image fitted to the window, you’ll want to add a border and multiply the image.
To remove any overlap outside of your 35x45mm window, then click Select > All and then Image > Crop, then hit D on your keyboard to restore your colour palette back to default. By using Image > Canvas Size it is possible to extend the border – add 5mm per side to make a 40x50mm (4x5cm) image.
To make your set of four images, use Canvas size again to double the width and height to 80x100mm, now Copy and Paste your image three times and use the Move tool to arrange them. Make sure they are copies as when applying for a passport it’s important to send a couple of identical images – there can’t be different poses in a single application.
Now flatten again into one layer (Layer > Flatten Image).
Make Your Own Passport Photos – Printing
Recent updates to the official rules for passport photos require that they are ‘professionally printed‘. This is something of a caveat to the process of home printing as is presents the possibility that your photos may be rejected by the passport office.
However, in the same document, it is made clear that photos should be printed on white paper and, although not suggested in the same document, in truth a decent quality inkjet printer with good inks and paper should effectively produce a professional-quality print.
Should you print your passport photos at home, ensure you use decent white photo paper, at the exact same size as onscreen (100%) and with the best possible resolution.
If your printer prompts you to resize to page or make any other changes then ignore these prompts. Once they are printed, use a ruler to measure each picture to ensure the size is still 35x45mm. Then cut them up with scissors and you’re all done – passport photos made at home on a budget.