1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. REMINDER

    Any content, information, or advice found on social media platforms and the wider Internet, including forums such as AP, should NOT be acted upon unless checked against a reliable, authoritative source, and re-checked, particularly where personal health is at stake. Seek professional advice/confirmation before acting on such at all times.

Old Kodak High Speed Infra-Red results

Discussion in 'Exhibition Lounge' started by PeteE, Jun 21, 2020.

  1. PeteE

    PeteE Well-Known Member

    I had a trip out into the Wide, Wide World for the first time since i came home from Hospital 2 weeks ago -- we went to Central Park CHELMSFORD Essex for a 'Family Socially Distanced' Picnic -- I took my Asahi Pentax LX with the 'Sticky Mirror Syndrome' which I have not used for a long time, loaded with 1997 dated Kodak High Speed Infra-Red Film found in my Freezer . I used 2 lenses. SMC Pentax-A 24mm f2.8 and SMC Pentax-M 50mm f1.7 and a 25A RED Filter. I had done a short length TEST in the garden before going to Chelmsford. I corrected the exposure and increased Development time . I used my Home-Made FX-15 ( Acutol-S Formula) 1+1 for 14 mins @ 20oC
    [​IMG]InfraRed Set Up by Peter Elgar, on Flickr
    [​IMG]InfraRed Test 01 by Peter Elgar, on Flickr
    [​IMG]InfraRed Test 02 by Peter Elgar, on Flickr
    [​IMG]InfraRed Test 03 by Peter Elgar, on Flickr
    [​IMG]InfraRed Test 04 by Peter Elgar, on Flickr
    [​IMG]InfraRed Test 08 by Peter Elgar, on Flickr
    [​IMG]InfraRed Test 09 by Peter Elgar, on Flickr
     
    DaveS, EightBitTony and Catriona like this.

Share This Page