Church x 1

[JediKnight]

The photo below is our local church. I am having problems trying to stop it looing like its going to topple over.

I have had a go using Elements 6 but just get everything to line up.



Link to original untouched photo

[alandelph]

Hi JediKnight
did this in elements 6 in the following manner:
Image, Transform, Distort,
Pulled the top left corner into a position on the left to square it up. Also used the magic wand to select the sky and used levels to adjust.
Hope you did not mind the edit but i hope this was the answer to your question, and helps you.
Did not spend more than a couple a mins with image.

Regards

Alan

[4BIKER2]

Using your original picture and the left hand side of the center tower ( near to the center of the picture ) as a guide, rotate the picture 2.83 degrees counter clockwise, or until it looks right and crop.

[mediaman]

Using your original picture and the left hand side of the center tower ( near to the center of the picture ) as a guide, rotate the picture 2.83 degrees counter clockwise, or until it looks right and crop.

Sometimes less is more!
That was all it needed IMVHO. Looking good.

[JediKnight]

Thanks everyone for your help, much appreciated