jennief
enthusiast
Reged: 28/04/2007
Posts: 264
Loc: Perthshire
|
|
I have been looking on the web for places to send my camera for sensor cleaning! Does anyone have any recommendations please? I can't put up with the dust spots any longer. Many thanks in anticipation. 
|
Gordon_McGeachie
Joke Historian
Reged: 19/01/2007
Posts: 3979
Loc: East Yorkshire,
|
|
Quote:
I have been looking on the web for places to send my camera for sensor cleaning! Does anyone have any recommendations please? I can't put up with the dust spots any longer. Many thanks in anticipation.
You dont say which Camera you have, but I use this for my Dynax 7d and Sony A700.
www.warehouseexpress.com/product/default.aspx?sku=1010899
--------------------
She (Avro Vulcan XH558)Took To The Sky Like A Lovesick Angel.
|
Paul_R
Pooh-Bah
Reged: 16/06/2006
Posts: 1948
Loc: Middlesbrough, England.
|
|
I need to clean mine but I'm going to have a go myself. I've been looking at these Green Clean Anyone used them?
--------------------
Regards, Paul CRIPN
http://www.pbase.com/exposethelight
|
Gordon_McGeachie
Joke Historian
Reged: 19/01/2007
Posts: 3979
Loc: East Yorkshire,
|
|
Quote:
I need to clean mine but I'm going to have a go myself. I've been looking at these Green Clean Anyone used them?
I use this and the one mentioned in my earlier post
www.warehouseexpress.com/product/default.aspx?sku=1012359
--------------------
She (Avro Vulcan XH558)Took To The Sky Like A Lovesick Angel.
|
Paul_R
Pooh-Bah
Reged: 16/06/2006
Posts: 1948
Loc: Middlesbrough, England.
|
|
Quote:
Quote:
I need to clean mine but I'm going to have a go myself. I've been looking at these Green Clean Anyone used them?
I use this and the one mentioned in my earlier post
www.warehouseexpress.com/product/default.aspx?sku=1012359
Thanks for that. It looks like the same 'Wet&Dry' system but with the added vacuum. I think I'll order the 'Wet&Dry' from 7Day and see how I get on with that. Mind you, they are now waiting for stock!
--------------------
Regards, Paul CRIPN
http://www.pbase.com/exposethelight
|
PhilW
Blue Peter Badge Winner
Reged: 14/03/2007
Posts: 921
Loc: Near Wakefield, Yorkshire
|
|
Quote:
I have been looking on the web for places to send my camera for sensor cleaning! Does anyone have any recommendations please? I can't put up with the dust spots any longer. Many thanks in anticipation.
Hae you tried giving it a good few blasts with a rocket blower ye? I find that nine times out of ten that does the job.
http://www.warehouseexpress.com/product/default.aspx?sku=13374
--------------------
Phil Winterbourne
http://www.pbase.com/calis
|
spangler
enthusiast
Reged: 04/04/2008
Posts: 309
Loc: Aylesbury
|
|
Yes and the Jessops one is a Giottos so you can get 10% off with your SPI discount card!
Regards, Andrew
|
jennief
enthusiast
Reged: 28/04/2007
Posts: 264
Loc: Perthshire
|
|
Yes Phil. I have blown it, Arctic Butterflied it, used Eclipse fluid and special wipes on it but to be honest I am scared to death touching the sensor! Hands shaking etc (and no its not the drink!). I don't seem to be able to shift the little ******s. I have read on the web that it often takes several goes to shift the stuff but I am basically "chicken". I would rather pay and know that my 5D is in safe and competent hands. I would hate to wreck it. So I was just checking where it was safe to send it.
|
Fen
BAD WOLF
Reged: 12/03/2002
Posts: 20151
Loc: Currently Unknown!
|
|
I know places in London and Manchester that do sensor cleaning, but nowhere in Scotland.
Have you tried google?
--------------------
Fen .......... My Galleries - My Blog - My Flickr
|
alanS
Dr Dust
Reged: 30/09/2005
Posts: 3511
Loc: Up North, England.
|
|
Paul, in the unlikely event that you need help let me know. I've cleaned my camera once or twice  and I'd be happy to go through the process with you (I live in Normanby.)
--------------------
Alan's defence lawyer claimed that "Booze played no part in his typo's."
|
Paul_R
Pooh-Bah
Reged: 16/06/2006
Posts: 1948
Loc: Middlesbrough, England.
|
|
Quote:
Paul, in the unlikely event that you need help let me know. I've cleaned my camera once or twice and I'd be happy to go through the process with you (I live in Normanby.)
Hi Alan, thanks for your kind offer which I may take you up on if the nerves get the better of me when I finally attempt to clean it! Do I need a passport to get into Normanby
--------------------
Regards, Paul CRIPN
http://www.pbase.com/exposethelight
|
Gordon_McGeachie
Joke Historian
Reged: 19/01/2007
Posts: 3979
Loc: East Yorkshire,
|
|
Quote:
Do I need a passport to get into Normanby
Only to get out................ 
--------------------
She (Avro Vulcan XH558)Took To The Sky Like A Lovesick Angel.
|
alanS
Dr Dust
Reged: 30/09/2005
Posts: 3511
Loc: Up North, England.
|
|
If you get out......
--------------------
Alan's defence lawyer claimed that "Booze played no part in his typo's."
|
Paul_R
Pooh-Bah
Reged: 16/06/2006
Posts: 1948
Loc: Middlesbrough, England.
|
|
Quote:
Quote:
Do I need a passport to get into Normanby
Only to get out................
--------------------
Regards, Paul CRIPN
http://www.pbase.com/exposethelight
|
Paul_R
Pooh-Bah
Reged: 16/06/2006
Posts: 1948
Loc: Middlesbrough, England.
|
|
Quote:
I need to clean mine but I'm going to have a go myself. I've been looking at these Green Clean Anyone used them?
Well, I have just took delivery of the Green Clean system and my camera batteries are on charge ready for 'the big clean'. Wish me luck 
--------------------
Regards, Paul CRIPN
http://www.pbase.com/exposethelight
|
Paul_R
Pooh-Bah
Reged: 16/06/2006
Posts: 1948
Loc: Middlesbrough, England.
|
|
Sensor cleaned and all seems ok  I had to have two attempts before it was totally clean. After the first clean it looked spotless. However, I took a couple of shots using the smallest aperture and the longest focal length (I believe that's how you check for dust spots) and found two very dark spots remaining. I tried a different lens, just to be sure, and they were still there. A second clean, with a little more pressure added, was called for and another couple of test shots showed the remaining dark spots had gone
I didn't find the process particularly daunting or difficult but if it was a 5D for example then my hands may have been shaking a little more! I wouldn't have any hesitation if/when the need arises again.
--------------------
Regards, Paul CRIPN
http://www.pbase.com/exposethelight
|
jennief
enthusiast
Reged: 28/04/2007
Posts: 264
Loc: Perthshire
|
|
This is a daft question I know BUT its the "little more pressure" bit that I may have wrong. I don't know if I am doing enough because I seem to make little impression on my dust b*****s. Does the bendy plastic thing with the wipe on it get pressed til it bends or not??
|
Paul_R
Pooh-Bah
Reged: 16/06/2006
Posts: 1948
Loc: Middlesbrough, England.
|
|
Quote:
This is a daft question I know BUT its the "little more pressure" bit that I may have wrong. I don't know if I am doing enough because I seem to make little impression on my dust b*****s. Does the bendy plastic thing with the wipe on it get pressed til it bends or not??
I didn't apply pressure to the extent that the little bendy plastic thing bent. The first clean I was a little worried that I may scratch the glass(?) surface as I dragged the 'specks' across it. The second clean I wasn't as concerned and applied more pressure. During the second clean I also let the cleaning fluid 'soak' for about 20-30 seconds to soak into the specks. I then again wiped over the surface a few more times with the wet wipe before using the dry wipe to remove the moisture.
Are you using the same 'Green Clean' as I used (link above)?
--------------------
Regards, Paul CRIPN
http://www.pbase.com/exposethelight
|
alanS
Dr Dust
Reged: 30/09/2005
Posts: 3511
Loc: Up North, England.
|
|
I'm glad you've got it sorted.
As I'm as poor as a church mouse I use a Pec Pad formed around a slice cut from an old credit card and held in place with a slither cut from a label. I put one or two drops of Eclipse fluid on the very end of the "tool," wait a few seconds and then carry out the clean.
A blast or two from a Rocket is worth trying before carrying out a wet clean.
--------------------
Alan's defence lawyer claimed that "Booze played no part in his typo's."
|
Paul_R
Pooh-Bah
Reged: 16/06/2006
Posts: 1948
Loc: Middlesbrough, England.
|
|
Quote:
I'm glad you've got it sorted.
As I'm as poor as a church mouse I use a Pec Pad formed around a slice cut from an old credit card and held in place with a slither cut from a label. I put one or two drops of Eclipse fluid on the very end of the "tool," wait a few seconds and then carry out the clean.
A blast or two from a Rocket is worth trying before carrying out a wet clean.
Thanks, Alan. As you are someone who is very 'keen' to keep their sensor free from dust I'd imagine it would work out very expensive for you, so having a 'home made' device is a logical step
--------------------
Regards, Paul CRIPN
http://www.pbase.com/exposethelight
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
